Show Line - Alcatel OS-LS-6224 User Manual

show line

The show line User EXEC mode command displays line parameters.
Syntax
show line [console | telnet | ssh]
Parameters
• console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Setting
If the line is not specified, the default value is console.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the line configuration.
Console> show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
4
Line Commands
449