Copying Files - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
commands:
copy tftp
Console#
Accessing file 'file1' on 172.16.101.101..
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!! [OK]
Copy took 0:01:11 [hh:mm:ss]

Copying Files

Files can be copied and deleted from the Copy Files Page.
Command Attributes
• Copy Master Firmware — Copies the Firmware file currently running on the
Stacking Master. The possible field values are selected from the following list
boxes:
• Source — Select if the Software Image or Bootcode file will be copied.
• Destination Unit — Select the stacking member to which the firmware is copied,
the possible field values are All, Backup, and stacking members 1-4.
• Copy Configuration — Copies the Running Configuration File. The possible field
values are: The possible field values are:
• Source — Select if the Starting Configuration file, the Running Configuration file,
or the Backup file will be copied.
• Destination — Specifies the usage for the source file after it is copied. It may be
used as a Starting Configuration file, the Running Configuration file, the Backup
file, or as a configuration file with a new name.
• Restore Configuration Factory Defaults — Resets the Configuration file to the
factory defaults. The factory defaults are reset after the device is reset. When
unselected, the device maintains the current Configuration file.
Web – System, System Management, File Management, Copy Files. Define the
64
//
: 172.16.101.101/file1
image
4-369