Vlan Database - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Command
switchport general
map macs-group
vlan
map subnet
subnets-group
switchport general
map subnets-group
vlan
switchport protected Overrides the FDB decision and sends all Unicast, Multicast and
ip
internal-usage-vlan
show vlan
show vlan internal
usage
show interfaces
switchport
switchport access
multicast-tv vlan
show vlan
protocols-groups
show vlan
macs-groups
show vlan
subnets-groups
show vlan
multicast-tv

vlan database

The vlan database Global Configuration mode command enters the VLAN
Configuration mode.
Syntax
vlan database
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
674
Table 4-38. VLAN Commands
Function
Sets a mac-based classification rule.
Maps the IP subnet to a group of IP subnets.
Sets a subnet-based classification rule.
Broadcast traffic to an uplink port. To return to the default
configuration, use the no form of the command.
Reserves a VLAN as the internal usage VLAN of an interface. To
return to the default configuration, use the no form of this
command.
Displays VLAN information.
Displays a list of VLANs used internally by the device.
Displays the switchport configuration.
Use the switchport access multicast-tv vlan Interface
Configuration mode command to enable receiving multicast
transmissions from a VLAN that is not the Access port VLAN,
while keeping the L2 segregation with subscribers on different
Access port VLANs. Use the no form of this command to disable
receiving multicast transmissions.
Displays protocols-groups information.
Displays macs-groups information.
Displays Subnets-groups Information.
Use the show vlan multicast-tv command to display information
on the source ports and receiver ports of multicast-TV VLAN.
Mode Page
IC 4-690
IC 4-690
IC 4-691
IC 4-692
IC 4-693
PE 4-694
PE 4-695
PE 4-696
IC 4-699
PE 4-700
PE 4-701
PE 4-701
PE 4-702