Lldp Optional-Tlv; Lldp Commands - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

LLDP Commands

Command

lldp optional-tlv

lldp med enable
lldp med
network-policy
(global)
lldp med
network-policy
(interface)
lldp med location
clear lldp rx
show lldp
configuration
show lldp med
configuration
show lldp local
show lldp neighbors To display information about neighboring devices discovered
lldp optional-tlv
The lldp optional-tlv Interface Configuration (Ethernet) mode command specifies
which optional TLVs from the basic set should be transmitted. To revert to the default
setting, use the no form of this command.
Syntax
lldp optional-tlv tlv1 [tlv2 ... tlv5]
no lldp optional-tlv
Parameters
• tlv — Specifies the TLV that should be included. Available optional TLVs
338
Table 4-9. LLDP Commands
Function
To specify which optional TLVs from the basic set should be
transmitted, use the lldp optional-tlv command in interface
configuration mode.
To enable Link Layer Discovery Protocol (LLDP) Media Endpoint
Discovery (MED) on an interface, use the lldp med enable
command in interface configuration mode.
To define LLDP MED network policy, use the lldp med
network-policy command in global configuration mode.
To attach an LLDP MED network policy to a port, use the lldp med
network-policy command in interface configuration mode.
To configure location information for the Link Layer Discovery
Protocol (LLDP) Media Endpoint Discovery (MED) for an
interface, use the lldp med location command in interface
configuration mode.
To restart the LLDP RX state machine and clearing the neighbors
table
To display the Link Layer Discovery Protocol (LLDP)
configuration.
To display the Link Layer Discovery Protocol (LLDP) Media
Endpoint Discovery (MED) configuration, use the show lldp med
configuration command in privileged EXEC mode.
To display the Link Layer Discovery Protocol (LLDP) information
that is advertised from a specific port, use the show lldp local
command in privileged EXEC mode.
using Link Layer Discovery Protocol (LLDP), use the show lldp
neighbors command in privileged EXEC mode.
Mode Page
ICE 4-338
ICE 4-339
GC 4-340
ICE 4-340
ICE 4-341
PE 4-342
PE 4-342
PE 4-343
PE 4-344
PE 4-345