Policy-Map; Class - Alcatel OS-LS-6224 User Manual

policy-map

The policy-map Global Configuration mode command creates a policy map and
enters the Policy-map Configuration mode. To delete a policy map, use the no form
of this command.
Syntax
policy-map policy-map-name
no policy-map policy-map-name
Parameters
• policy-map-name — Specifies the name of the policy map.
Default Setting
If the packet is an IP packet, the DCSP value of the policy map is 0.
If the packet is tagged, the CoS value is 0.
Command Mode
Global Configuration mode
Command Usage
Before configuring policies for classes whose match criteria are defined in a
class map, use the policy-map Global Configuration mode command to
specify the name of the policy map to be created or modified.
Class policies in a policy map can only be defined if match criteria has already
been defined for the classes. Use the class-map Global Configuration and
match Class-map Configuration commands to define the match criteria of a

class.

Only one policy map per interface per direction is supported. A policy map can
be applied to multiple interfaces and directions.
Example
The following example creates a policy map called policy1 and enters the
Policy-map Configuration mode.
Console (config)# policy-map policy1
Console (config-pmap)#
Related Commands
show policy-map
service-policy
class
The class Policy-map Configuration mode command defines a traffic classification
and enters the Policy-map Class Configuration mode. To remove a class map from
the policy map, use the no form of this command.
4
QoS Commands
483