Spanning-Tree Pathcost Method - Alcatel OS-LS-6224 User Manual

• shared — Indicates that the port link type is shared.
Default Setting
The device derives the port link type from the duplex mode. A full-duplex port
is considered a point-to-point link and a half-duplex port is considered a
shared link.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables shared spanning-tree on Ethernet port 1/e5
Console(config)# interface ethernet 1/e15
Console(config-if)# spanning-tree link-type shared
Related Commands
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree disable
spanning-tree cost
spanning-tree port-priority
spanning-tree portfast
show spanning-tree

spanning-tree pathcost method

The spanning-tree pathcost method Global Configuration mode command sets
the default path cost method. To return to the default configuration, use the no form
of this command.
Syntax
spanning-tree pathcost method {long | short}
no spanning-tree pathcost method
Parameters
• long — Specifies port path costs with a range of 1-200,000,000.
• short — Specifies port path costs with a range of 1-65,535.
Spanning-Tree Commands
4
.
561