Defining Lldp Port Settings; Figure 3-58. Lldp Properties Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
opens:

Defining LLDP Port Settings

The LLDP Port Settings Page allows network administrators to define LLDP port
settings, including the port type, the LLDP port state, and the type of port information
advertised. To define LLDP Port Properties:
Command Attributes
• Unit No. — Indicates the stacking member for which the interface configuration
information is displayed.
• Interface — Contains a list of ports on which LLDP is enabled.
• State — Indicates the port type on which LLDP is enabled. The possible field
values are:
– Tx Only — Enables transmitting LLDP packets only.
– Rx Only — Enables receiving LLDP packets only.
– Tx & Rx — Enables transmitting and receiving LLDP packets. This is the
default value.
– Disable — Indicates that LLDP is disabled on the port.
• Optional TLVs — Contains a list of optional TLVs advertised by the port. For
the complete list, see the Available TLVs field.
• Management IP Address — Indicates the management IP address that is
advertised from the interface.
• Neighbors — Information received from neighboring device LLDP advertise-
ments.
Web – Click Network Discovery, LLDP, Port settings. Define the fields and click
Apply.
130

Figure 3-58. LLDP Properties Page