Alcatel OS-LS-6224 User Manual page 500

4
Command Line Interface
---- ----------------
1/e1 IP Phone Model A
Overload Counter: 1
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
The following table describes the significant fields shown in the example:
Field
Power
Nominal Power
Consumed Power
Usage Threshold
Traps
Port
Powered Device
State
Priority
Status
Classification
Overload Counter
Short Counter
Denied Counter
Absent Counter
Invalid Signature
Counter
476
----- --------
Auto On
Description
The operational status of the inline power sourcing equipment.
The nominal power of the inline power sourcing equipment in Watts.
Measured usage power in Watts.
The usage threshold expressed in percents for comparing the measured
power and initiating an alarm if threshold is exceeded.
Indicates if inline power traps are enabled.
The Ethernet port number.
Description of the powered device type.
Indicates if the port is enabled to provide power. Can be: Auto or Never.
The priority of the port from the point of view of inline power management.
Can be: Critical, High or Low.
Describes the inline power operational status of the port. Can be: On, Off,
Test-Fail, Testing, Searching or Fault.
The power consumption range of the powered device. Can be: 0.44 – 12.95,
0.44 – 3.84, 3.84 – 6.49 or 6.49 – 12.95.
Counts the number of overload conditions that has been detected.
Counts the number of short conditions that has been detected.
Counts the number of times power has been denied.
Counts the number of times power has been removed because powered
device dropout was detected.
Counts the number of times an invalid signature of a powered device was
detected.
------ -------------
High 0.44 - 12.95