Terminal Datadump - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Example
The following example describes the help system
Console# help
Help may be requested at any point in a command by entering a question
mark '?'. If nothing matches the currently entered incomplete command, the
help list is empty. This indicates that for a query at this point, there
is no command matching the current input. If the request is within a
command, enter backspace and erase the entered characters to a point where
the request results in a display.
Help is provided when:
1. There is a valid command and a help request is made for entering a
parameter or argument (e.g. 'show ?'). All possible parameters or
arguments for the entered command are displayed.
2. An abbreviated argument is entered and a help request is made for
arguments matching the input (e.g. 'show pr?').
Related Commands
login
configure

terminal datadump

The terminal datadump User EXEC mode command enables dumping all the
output of a show command without prompting. To disable dumping, use the no form
of this command.
Syntax
terminal datadump
no terminal datadump
Default Setting
Dumping is disabled.
Command Mode
User EXEC mode
Command Usage
By default, a More prompt is displayed when the output contains more lines
than can be displayed on the screen. Pressing the Enter key displays the next
line; pressing the Spacebar displays the next screen of output. The datadump
command enables dumping all output immediately after entering the show
command.
This command is relevant only for the current session.
Example
This example dumps all output immediately after entering a show command.
Console> terminal datadump
670
.