Ip-Access-List; Acl Commands - Alcatel OS-LS-6224 User Manual

ACL Commands

.
Command Function

ip-access-list

Enables the IP-Access Configuration mode and creates Layer 3
ACLs. To delete an ACL, use the no form of this command.
permit (ip) Permits traffic if the conditions defined in the permit statement
match.
deny (IP) Denies traffic if the conditions defined in the deny statement
match.
mac access-list Enables the MAC-Access List Configuration mode and creates
Layer 2 ACLs. To delete an ACL, use the no form of this
command.
permit (MAC) Defines permit conditions of an MAC ACL.
deny (MAC) Denies traffic if the conditions defined in the deny statement
match.
service-acl Applies an ACL to the input interface. To detach an ACL from an
input interface, use the no form of this command.
show access-lists Displays access control lists (ACLs) defined on the device.
show interfaces Displays access lists applied on interfaces.
access-lists
ip-access-list
The ip-access-list Global Configuration command enables the IP-Access
Configuration mode and creates Layer 3 ACLs. To delete an ACL, use the no form
of this command.
Syntax
ip-access-list name
no ip-access-list name
Parameters
• name — Specifies the name of the ACL.
Default Setting
The default for all ACLs is deny-all.
Command Mode
Global Configuration mode
Command Usage
Up to 1018 rules can be defined on the device, depending on the type of rule
defined.
Table 4-7. ACL Commands
4
ACL Commands
Mode Page
GC 4-305
ACL 4-306
ACL 4-309
GC 4-311
ACL 4-312
ACL 4-313
IC 4-315
PE 4-315
PE 4-316
305