Alcatel OS-LS-6224 User Manual page 532

4
Command Line Interface
skipped over by transaction requests. (Range: 0-2000)
• key-string — Specifies the authentication and encryption key for all
RADIUS communications between the device and the RADIUS server. This
key must match the encryption used on the RADIUS daemon. To specify an
empty string, enter "". (Range: 0-128 characters)
• source — Specifies the source IP address to use for communication.
0.0.0.0 is interpreted as request to use the IP address of the outgoing IP
interface.
• priority — Determines the order in which servers are used, where 0 has the
highest priority. (Range: 0-65535)
• type — Specifies the usage type of the server. Possible values are:
login, dot.1x or all.
Default Setting
No RADIUS server host is specified.
The port number for authentication requests is 1812.
The usage type is all.
Command Mode
Global Configuration mode
Command Usage
To specify multiple hosts, multiple radius-server host commands can be
used.
If no host-specific timeout, retries, deadtime or key-string values are specified,
global values apply to each RADIUS server host.
The address type of the source parameter must be the same as the
ip-address parameter.
To define a RADIUS server on the out-of-band port, use the out-of-band IP
address format - oob/ip-address.
Example
The following example specifies a RADIUS server host with IP address
192.168.10.1, authentication request port number 20 and a 20-second timeout
period.
Console(config)# radius-server host 192.168.10.1 auth-port 20 timeout 20
Related Commands
radius-server key
radius-server retransmit
radius-server source-ip
radius-server timeout
508