show ip http
ip http exec-timeout
The ip http exec-timeout Global Configuration mode command sets the interval,
which the system waits to user input in http sessions before automatic logoff. To
restore the default configuration, use the no form of this command.
Syntax
ip http exec-timeout minutes [seconds]
no ip http exec-timeout
Parameters
• minutes — Integer that specifies the number of minutes.
• seconds — Additional time intervals in seconds.
Default Configuration
The default is 10 minutes.
Command Mode
Global Configuration mode
Command Usage
This command also configures the exec-timeout for HTTPS in case the
HTTPS timeout was not set.
To specify no timeout, enter the ip https exec-timeout 0 0 command.
Example
The following example sets the http session timeout interval to 15 minutes.
Console(config)# ip http exec-timeout 15
ip https server
The ip https server Global Configuration mode command enables configuring the
device from a secured browser. To return to the default configuration, use the no
form of this command.
Syntax
ip https server
no ip https server
Default Setting
Disabled.
Command Mode
Global Configuration mode
Web Server Commands
4
705