Ip Igmp Snooping Map Cpe Vlan - Alcatel OS-LS-6224 User Manual

Syntax
switchport customer multicast-tv vlan {add vlan-list | remove vlan-list}
Parameters
• vlan-list — List of Multicast TV VLANs.
Default Setting
The port is not member in any multicast TV VLAN.
Command Mode
Interface Configuration (Ethernet, port-channel)
Command Usage
The user cannot transmit Multicast transmissions on Multicast TV VLANs.
Example
The following example configure port e1 to enable receiving multicast transmissions
from a VLAN that is not the customer port's VLAN.
Console (config-if)# switchport customer multicast-tv vlan add 3000
Related Commands

ip igmp snooping map cpe vlan

show ip igmp snooping cpe vlans
ip igmp snooping map cpe vlan
The ip igmp snooping map cpe vlan Global Configuration command maps CPE
VLANs to multicast-TV VLANs. Use the no form of this command to remove the
mapping.
Syntax
ip igmp snooping map cpe vlan vlan-id multicast-tv vlan vlan-id
no ip igmp snooping map cpe vlan vlan-id
Parameters
• cpe vlan vlan-id — Specify the CPE VLAN.
• multicast-tv vlan vlan-id — Specify the Multicast VLAN.
Default Setting
No mapping exists.
Command Mode
Global Configuration
Command Usage
Use this command to associate CPE VLAN to a multicast-TV VLAN.
Triple Play Commands
4
639