Qos Map Dscp-Mutation - Alcatel OS-LS-6224 User Manual

Example
The following example applies the DSCP Mutation map to system DSCP trusted
ports.
Console(config)# qos dscp-mutation
Related Commands
qos trust (Global)
qos cos

qos map dscp-mutation

The qos map dscp-mutation Global Configuration mode command modifies the
DSCP to DSCP mutation map. To return to the default DSCP to DSCP mutation
map, use the no form of this command.
Syntax
qos map dscp-mutation in-dscp to out-dscp
no qos map dscp-mutation
Parameters
• in-dscp — Specifies up to 8 DSCP values separated by spaces.
(Range: 0-63)
• out-dscp — Specifies up to 8 DSCP values separated by spaces.
(Range: 0-63)
Default Setting
The default map is the Null map, which means that each incoming DSCP
value is mapped to the same DSCP value.
Command Mode
Global Configuration mode.
Command Usage
This is the only map that is not globally configured. it is possible to have
several maps and assign each one to different ports.
Example
The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP mutation
.
map value 63
Console (config)# qos map dscp-mutation 1 2 4 5 6 to 63
4
QoS Commands
503