Defining Rmon History Control - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
Undersize Pkts: 0
Fragments: 0
64 Octets: 98
128 to 255 Octets: 0
512 to 1023 Octets: 491

Defining RMON History Control

The History Control Page contains information about samples of data taken from
ports. For example, the samples may include interface definitions or polling periods.
Command Attributes
• History Entry No. — Displays the entry number for the History Control Table page.
• Source Interface — Displays the interface from which the history samples were
taken. The possible field values are:
• Port — Specifies the port from which the RMON information was taken.
• LAG — Specifies the port from which the RMON information was taken.
• Sampling Interval — Indicates in seconds the time that samplings are taken from
the ports. The field range is 1-3600. The default is 1800 seconds (equal to 30
minutes).
• Samples Requested— Displays the number of samples to be saved. The field
range is 1-65535. The default value is 50.
• Current Number of Samples — Displays the current number of samples taken.
• Owner — Displays the RMON station or user that requested the RMON
information. The field range is 0-20 characters.
• Remove — Removes History Control entries. The possible field values are:
• Checked — Removes the selected History Control entry.
• Unchecked — Maintains the current History Control entries.
Web – Click System, RMON, History, History Control and select an interface.
118
Oversize Pkts: 0
Jabbers: 0
65 to 127 Octets: 0
256 to 511 Octets: 0
1024 to 1518 Octets: 389