Switchport Trunk Allowed Vlan - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Example
The following example configures a VLAN ID of 23 to the untagged layer 2 VLAN
Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport access vlan 23
Related Commands
switchport mode

switchport trunk allowed vlan

switchport trunk native vlan
switchport general allowed vlan
switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport trunk allowed vlan
The switchport trunk allowed vlan Interface Configuration mode command adds
or removes VLANs to or from a trunk port.
Syntax
switchport trunk allowed vlan {add vlan-list | remove vlan-list}
Parameters
• add vlan-list — List of VLAN IDs to be added. Separate nonconsecutive
VLAN IDs with a comma and no spaces. A hyphen designates a range of
IDs.
• remove vlan-list — List of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
Default Setting
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
682