Configuring Interfaces; Configuring Interface Connections; Figure 3-21. Tcam Resources Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch

Configuring Interfaces

The Interfaces pages provide detailed information about each interface on the
switch, such as administrative status, input/output packets, packet errors and
discards.

Configuring Interface Connections

You can use the Interface Configuration Page to enable/disable an interface, set
auto-negotiation and the interface capabilities to advertise, or manually fix the
speed, duplex mode, and flow control. Interfaces can also be designated as PVE
ports. PVE ports bypass the Forwarding Database (FDB), and forward all Unicast,
Multicast and Broadcast traffic to an uplink. A single uplink can be defined for a
protected port.
Command Attributes
• Unit No. — Indicates the stacking member for which the interface configuration
information is displayed.
• Interface — Indicates the stacking member for which the interface configuration
information is displayed.
• Name — Displays the port number.
• Port Type — Displays the port type. The possible field values are:
• Copper — Indicates the port has a copper port connection.
• Fiber — Indicates the port has a fiber optic port connection.
68

Figure 3-21. TCAM Resources Page