Show Loopback-Detection - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
no loopback-detection interval
Parameters
• seconds — Specifies the number of seconds between Loopback Detection
packets (Range: 30-60).
Default Setting
The default interval between Loopback Detection packets is 30 seconds.
Command Mode
Global Configuration mode
Command Usage
This command is not relevant for stp-bpdu.
Examples
The following example sets the Loopback Detection interval to 45 seconds.
Console(config)# loopback-detection interval 45
Related Commands
loopback-detection enable
loopback-detection enable
loopback-detection mode

show loopback-detection

show loopback-detection
The show loopback-detection command displays information about the Loopback
Detection configuration.
Syntax
show loopback-detection
Default Setting
This command has no default configuration.
Command Mode
EXEC mode
Command Usage
There are no user guidelines for this command.
Examples
The following example displays the Loopback Detection configuration information.
Console# show loopback-detection
454