Rate-Limit - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Syntax
class class-map-name [access-group acl-name]
no class class-map-name
Parameters
• class-map-name — Specifies the name of an existing class map. If the
class map does not exist, a new class map will be created under the
specified name.
• acl-name — Specifies the name of an IP or MAC ACL.
Default Setting
No policy map is defined.
Command Mode
Policy-map Configuration mode
Command Usage
Before modifying a policy for an existing class or creating a policy for a new
class, use the policy-map Global Configuration mode command to specify the
name of the policy map to which the policy belongs and to enter the
Policy-map Configuration mode.
Example
The following example defines a traffic classification called class1 with an
access-group called Alcatel. The class is in a policy map called policy1.
Console(config)# policy-map policy1
Console (config-pmap)# class class1 access-group Alcatel

rate-limit

The rate-limit Interface Configuration command limits the rate of the incoming
traffic. The no form of this command is used to disable rate limit.
Syntax
rate-limit rate
no rate-limit
Parameters
• rate — Maximum of kilobits per second of ingress traffic on a port.
(Range: 62K - 100M)
Default Setting
1000 Kbits/Sec
Command Mode
Interface Configuration (Ethernet)
484