Power Inline Powered-Device - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Related Commands

power inline powered-device

power inline priority
power inline usage-threshold
show power inline
power inline powered-device
The power inline powered-device Interface Configuration (Ethernet) mode
command adds a comment or description of the powered device type to enable the
user to remember what is attached to the interface. To remove the description, use
the no form of this command.
Syntax
power inline powered-device pd-type
no power inline powered-device
Parameters
• pd-type — Specifies the type of powered device attached to the interface
(Range: 1-24 characters).
Default Setting
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures a description to an IP-phone to a powered device
connected to Ethernet interface 1/e1.
Console(config)# interface ethernet 1/e1
Console(config-if)# power inline powered-device IP-phone
Related Commands
power inline
power inline priority
power inline usage-threshold
show power inline
472