Show Bridge Address-Table Static; Show Bridge Address-Table Count - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Related Commands
bridge address

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays
statically created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface |
port-channel port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
Console# show bridge address-table static
Aging time is 300 sec
Vlan
------ -----------------
1 00:60:70:4C:73:FF
1 00:60.70.8C.73:FF
200 00:10:0D:48:37:FF
Related Commands
bridge address

show bridge address-table count

The show bridge address-table count Privileged EXEC mode command displays
the number of addresses present in the Forwarding Database.
330
Mac Address Port
---- -----------------
1/e8 Permanent
1/e8 delete-on-timeout
1/e9 delete-on-reset
Type