Password; Enable Password - Alcatel OS-LS-6224 User Manual

ip http authentication
ip https authentication

password

The password Line Configuration mode command specifies a password on a line.
To remove the password, use the no form of this command.
Syntax
password password [encrypted]
no password
Parameters
• password — Password for this level (Range: 1-159 characters).
• encrypted — Encrypted password to be entered, copied from another
device configuration.
Default Setting
No password is defined.
Command Mode
Line Configuration mode
Command Usage
If a password is defined as encrypted, the required password length is 32
characters.
Example
The following example specifies password secret on a console.
Console(config)# line console
Console(config-line)# password secret
Related Commands
show privilege

enable password

The enable password Global Configuration mode command sets a local password
to control access to user and privilege levels. To remove the password requirement,
use the no form of this command.
Syntax
no enable password [level level] password [encrypted]
no enable password [level level]
Parameters
• password — Password for this level (Range: 1-159 characters).
• level — Level for which the password applies. If not specified the level is 15
4
AAA Commands
301