4
Command Line Interface
If an IGMP message is received on a customer port tagged with a CPE VLAN,
and there is a mapping from that CPE VLAN to a multicast-TV VLAN, the
IGMP message would be associated with the multicast-TV VLAN.
Example
The following example maps an internal CPE VLAN number 4 to the Multicast TV
VLAN number 300.
Console (config)# ip igmp snooping map cpe vlan 4 multicast-tv vlan 300
Related Commands
switchport customer multicast-tv vlan
show ip igmp snooping cpe vlans
show ip igmp snooping cpe vlans
The show ip igmp snooping cpe vlans Privileged EXEC mode command displays
the CPE VLANs to Multicast TV VLANs mappings.
Syntax
show ip igmp snooping cpe vlans [vlan vlan-id]
Parameters
• vlan-id — CPE VLAN ID value.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the CPE VLANs to Multicast TV VLANs mappings.
Console# show ip igmp snooping cpe vlans
CPE VLAN
multicast TV VLAN
--------
------------------
3
1118
3
1119
Related Commands
switchport customer multicast-tv vlan
ip igmp snooping map cpe vlan
640