4
Command Line Interface
Command Mode
Global Configuration
Command Usage
Only a user with access level 15 can use the Web server.
Example
The following example enables configuring the device from a browser.
Console(config)# ip http server
Related Commands
ip http port
show ip http
ip http port
The ip http port Global Configuration mode command specifies the TCP port to be
used by the Web browser interface. To return to the default configuration, use the no
form of this command.
Syntax
ip http port port-number
no ip http port
Parameters
• port-number — Port number for use by the HTTP server.
(Range: 1 - 65535)
Default Setting
The default port number is 80.
Command Mode
Global Configuration
Command Usage
Use the crypto certificate generate Global Configuration mode command to
generate an HTTPS certificate.
Specifying 0 as the port number effectively disables HTTP access to the
device.
Example
The following example configures the http port number to 100.
Console(config)# ip http port 100
Related Commands
ip http server
704