Switchport General Pvid - Alcatel OS-LS-6224 User Manual

Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
This command enables changing the egress rule (e.g., from tagged to
untagged) without first removing the VLAN from the list.
Example
The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port 1/
e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general allowed vlan add 2,5-6 tagged
Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan
switchport trunk native vlan

switchport general pvid

switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport general pvid
The switchport general pvid Interface Configuration mode command configures
the PVID when the interface is in general mode. To return to the default
configuration, use the no form of this command.
Syntax
switchport general pvid vlan-id
no switchport general pvid
Parameters
• vlan-id — Specifies the PVID (Port VLAN ID).
Default Setting
If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
4
VLAN Commands
685