Speed - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Command Usage
There are no user guidelines for this command.
Example
The following example configures the device as a virtual terminal for remote console
access.
Console(config)# line telnet
Console(config-line)#
Related Commands
show line

speed

The speed Line Configuration mode command sets the line baud rate. To return to
the default configuration, use the no form of the command.
Syntax
speed bps
no speed
Parameters
• bps—Baud rate in bits per second (bps). Possible values are 2400, 9600,
19200, 38400, 57600 and 115200.
Default Setting
The default speed is 9600 bps.
Command Mode
Line Configuration (console) mode
Command Usage
This command is available only on the line console.
The configured speed is applied when Autobaud is disabled. This
configuration applies only to the current session.
Example
The following example configures the line baud rate to 115200.
Console(config)# line console
Console(config-line)# speed 115200
Related Commands
show line
444