Lldp Commands; Show Lldp Neighbors - Alcatel OS-LS-6224 User Manual

Example
Switch# show lldp local ethernet 1/1
Device ID: 0060.704C.73FF
Port ID: 1
Capabilities: Bridge
System Name: ts-7800-1
System description:
Port description:
Management address: 172.16.1.8
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported
Auto-negotiation status: Enabled
Auto-negotiation Advertised Capabilities: 100BASE-TX full duplex,
1000BASE-T full duplex
Operational MAU type: 1000BaseTFD
LLDP-MED capabilities: Network Policy, Location Identification
LLDP-MED Device type: Network Connectivity
LLDP-MED Network policy
Application type: Voice
Flags: Tagged VLAN
VLAN ID: 2
Layer 2 priority: 0
DSCP: 0
LLDP-MED Power over Ethernet
Device Type: Power Sourcing Entity
Power source: Primary Power Source
Power priority: High
Power value: 9.6 Watts
LLDP-MED Location
Coordinates: 54:53:c1:f7:51:57:50:ba:5b:97:27:80:00:00:67:01

show lldp neighbors

The show lldp neighbors Privileged EXEC mode command displays information
about neighboring devices discovered using Link Layer Discovery Protocol (LLDP).
Syntax
show lldp neighbors [ethernet interface]
Parameters
• interface — Ethernet port
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
4

LLDP Commands

345