Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example assigns a long administrative LACP timeout to Ethernet port
1/e6.
Console(config)# interface ethernet 1/e6
Console(config-if)# lacp timeout long
Related Commands
lacp port-priority
show lacp ethernet
show lacp port-channel
show lacp ethernet
The show lacp ethernet Privileged EXEC mode command displays LACP
information for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Parameters
• interface — Valid Ethernet port. (Full syntax: unit/port)
• parameters — Link aggregation parameter information.
• statistics — Link aggregation statistics information.
• protocol-state — Link aggregation protocol-state information.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example display LACP information for Ethernet port 1/e1.
Console# show lacp ethernet 1/e1
Port 1/e1 LACP parameters:
Actor
4
LACP Commands
439