Clock Summer-Time - Alcatel OS-LS-6224 User Manual

Default Setting
Clock set to UTC.
Command Mode
Global Configuration mode
Command Usage
The system internally keeps time in UTC, so this command is used only for
display purposes and when the time is manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
#
Console(config)
Related Commands
clock set
clock source

clock summer-time

clock summer-time
The clock summer-time Global Configuration mode command configures the
system to automatically switch to summer time (daylight saving time). To configure
the software not to automatically switch to summer time, use the no form of this
command.
Syntax
clock summer-time recurring {usa | eu | {week day month hh:mm week day
month hh:mm}} [offset offset] [zone acronym]
clock summer-time date date month year hh:mm date month year hh:mm
[offset offset] [zone acronym]
clock summer-time date month date year hh:mm month date year hh:mm
[offset offset] [zone acronym]
no clock summer-time recurring
Parameters
• recurring — Indicates that summer time should start and end on the
corresponding specified days every year.
• date — Indicates that summer time should start on the first specific date
listed in the command and end on the second specific date in the command.
• usa — The summer time rules are the United States rules.
• eu — The summer time rules are the European Union rules.
• week — Week of the month. (Range: 1 - 5, first, last)
• day — Day of the week (Range: first three letters by name, like sun)
• date — Date of the month. (Range:1 - 31)
clock timezone -6 zone CST
4
Clock Commands
355