CLI –The following is an example of the MSTP general properties commands:
Console(config)# spanning-tree mst max-hops 10
Defining MSTP Instance Settings
MSTP maps VLANs into STP instances. Packets assigned to various VLANs are
transmitted along different paths within Multiple Spanning Tree Regions (MST
Regions). Regions are one or more Multiple Spanning Tree bridges by which frames
can be transmitted. In configuring MSTP, the MST region to which the device
belongs is defined. A configuration consists of the name, revision, and region to
which the device belongs.
Network administrators can define the MSTP instance settings using the MSTP
Instance Settings Page
Note:
To ensure that the MSTI maintains connectivity across the network, you must
configure a related set of bridges with the same MSTI settings.
Command Attributes
• Instance ID — Specifies the VLAN group to which the interface is assigned.
• Included VLAN — Maps the selected VLANs to the selected instance. Each VLAN
belongs to one instance.
• Bridge Priority — Specifies the selected spanning tree instance device priority.
The field range is 0-61440.
• Designated Root Bridge ID — Indicates the ID of the bridge with the lowest path
cost to the instance ID.
• Root Port — Indicates the selected instance's root port.
• Root Path Cost — Indicates the selected instance's path cost.
Figure 3-99. MSTP General Page
.
Configuring Spanning Tree
3
4-564
199