Alcatel OS-LS-6224 User Manual page 591

Parameters
• instance-ID — ID of the spanning -tree instance (Range: 1-16).
• cost — The port path cost. (Range: 1 - 200,000,000)
Default path cost is determined by port speed and path cost method (long
or short) as shown below:
Interface
Port-channel
Gigabit Ethernet (1000 Mbps)
Fast Ethernet (100 Mbps)
Ethernet (10 Mbps)
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the MSTP instance 1 path cost for Ethernet port 1/
e9 to 4.
Console(config) # interface ethernet 1/e9
Console(config-if) # spanning-tree mst 1 cost 4
Related Commands
spanning-tree mst priority
spanning-tree mst max-hops
spanning-tree mst port-priority
spanning-tree mst configuration
instance (mst)
name (mst)
revision (mst)
show (mst)
exit (mst)
abort (mst)
show spanning-tree
Spanning-Tree Commands
Long
20,000
20,000
200,000
2,000,000
4
Short
4
4
19
100
567