Address Table Commands - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

Address Table Commands

.
Command
bridge address
bridge multicast
filtering
bridge multicast
address
bridge multicast
forbidden address
bridge multicast
forward-all
bridge multicast
forbidden
forward-all
bridge aging-time
clear bridge
port security
port security mode
port security max
port security routed
secure-address
show bridge
address-table
show bridge
address-table static
show bridge
address-table count
show bridge
multicast
address-tablet
show bridge
multicast
address-table static
318
Table 4-8. Address Table Commands
Function
Adds a MAC-layer station source address to the bridge table. To
delete the MAC address, use the no form of this command.
Enables filtering multicast addresses. To disable filtering multicast
addresses, use the no form of this command.
Registers a MAC-layer multicast address in the bridge table and
statically adds ports to the group. To unregister the MAC address,
use the no form of this command
Forbids adding a specific multicast address to specific ports. Use
the no form of this command to return to the default configuration.
Enables forwarding all multicast packets on a port. To restore the
default configuration, use the no form of this command.
Forbids a port to be a forward-all-multicast port. To restore the
default configuration, use the no form of this command.
Sets the address table aging time. To restore the default
configuration, use the no form of this command.
Removes any learned entries from the forwarding database.
Locks the port, thereby, blocking unknown traffic and preventing
the port from learning new addresses. To return to the default
configuration, use the no form of this command.
Configures the port security mode. To return to the default
configuration, use the no form of this command.
Configures the maximum number of addresses that can be
learned on the port while the port is in port security mode. To
return to the default configuration, use the no form of this
command.
Adds a MAC-layer secure address to a routed port. Use the no
form of this command to delete a MAC address.
Displays all entries in the bridge-forwarding database.
Displays statically created entries in the bridge-forwarding
database.
Displays the number of addresses present in the Forwarding
Database.
Displays bridge multicast address table information
Displays the statically configured multicast addresses.
Mode Page
ICV 4-319
GC 4-320
ICV 4-321
ICV 4-322
ICV 4-323
ICV 4-324
GC 4-324
PE 4-325
IC 4-326
IC 4-326
IC 4-327
IC 4-328
PE 4-329
PE 4-330
PE 4-330
UE 4-331
UE 4-333