4
Command Line Interface
Example
The following example enables 802.1X authentication on Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x port-control auto
Related Commands
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x re-authentication
The dot1x re-authentication Interface Configuration mode command enables
periodic re-authentication of the client. To return to the default configuration, use the
no form of this command.
Syntax
dot1x re-authentication
no dot1x re-authentication
Default Setting
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet)
Command Usage
There are no user guidelines for this command.
Example
The following example enables periodic re-authentication of the client.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x re-authentication
Related Commands
dot1x port-control
272