Lldp Med Location - Alcatel OS-LS-6224 User Manual

Parameters
• number — Network policy sequential number.
Default Configuration
No network policy is attached.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no guidelines for this command.
Example
In this example, an LLDP MED network policy is attached to an Ethernet port.
Console (config)# interface ethernet 1/e1
Console (config-if)# lldp med network-policy 1

lldp med location

The lldp med location Interface Configuration (Ethernet) mode configures the
location information for the Link Layer Discovery Protocol (LLDP) Media Endpoint
Discovery (MED) for an interface. To delete location information for an interface, use
the no form of this command.
Syntax
lldp med location coordinate data
no lldp med location coordinate
lldp med location civic-address data
no lldp med location civic-address
lldp med location ecs-elin data
no lldp med location ecs-elin
Parameters
• coordinate — Displays the location specified as coordinates.
• civic-address — Displays the location specified as civic address.
• ecs-elin — Displays the location specified as ECS ELIN.
• data — Displays the data format as defined in ANSI/TIA 1057. Specifies the
location as dotted hexadecimal data: Each byte in hexadecimal character
strings is two hexadecimal digits. Each byte can be separated by a period
or colon. For coordinated: 16. For civic address: 6 - 160 hexadecimal digits.
For ECS ELIN: 10 - 25 hexadecimal digits.
4
LLDP Commands
341