Defining Sntp Authentication; Figure 3-12. Sntp Configuration Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
CLI - The following is an example of the SNTP global parameters commands:
Console(config)# sntp client poll timer 120
Console(config)# sntp Broadcast client enable
Console(config)# sntp unicast client enable
Console(config)# sntp anycast client enable
Console(config)# sntp unicast client poll

Defining SNTP Authentication

The SNTP Authentication Page provides parameters for defining the means by
which the SNTP server is authenticated.
Command Attributes
• Enable SNTP Authentication — Indicates if authenticating an SNTP session
between the device and an SNTP server is enabled on the device. The possible
field values are:
• Checked — Authenticates SNTP sessions between the device and SNTP
server.
• Unchecked — Disables authenticating SNTP sessions between the device and
SNTP server.
• Encryption Key ID — Indicates if the encryption key identification is used to
authenticate the SNTP server and device. The field value is up to 4294967295.
• Authentication Key — Indicates the key used for authentication.
• Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
52

Figure 3-12. SNTP Configuration Page

4-359
4-360
4-362
4-361
4-363