Configuring General DNS Server Parameters
The DNS Server Page contains fields for enabling and activating specific DNS
servers.
Command Attributes
• Enable DNS — Enables translating the DNS names into IP addresses. The
possible field values are:
• Checked — Translates the domains into IP addresses.
• Unchecked — Disables translating domains into IP addresses.
• Default Domain Name — Specifies the user-defined DNS server name.
• Type — Displays the Default Domain Name type. The possible field values are:
• Dynamic — Indicates that the Default Domain Name is dynamically created.
• Static — Indicates that the Default Domain Name is a static IP address.
• Remove — Removes DNS servers. The possible field values are:
• Checked — Removes the selected DNS server
• Unchecked — Maintains the current DNS server list.
• DNS Server — Displays the DNS server IP address. DNS servers are added in the
Add DNS Server Page.
• Active Server— Specifies the DNS server that is currently active.
Note:
All DNS servers can be selected by clicking Select All in DNS Server Table. Do not
include the initial dot that separates the host name from the domain name.
Web – Select System, IP Addressing, Domain Name System, DNS Server. Set the
default domain name or DNS server list, define the fields and click Apply.
Figure 3-31. DNS Server Page
Configuring Domain Name Service
3
85