Rmon Collection History - Alcatel OS-LS-6224 User Manual

User guide
Hide thumbs Also See for OS-LS-6224:
Table of Contents

Advertisement

Jabbers
The total number of packets received longer than 1632 octets (excluding framing
bits, but including FCS octets), and either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a non-integral number
of octets (Alignment Error).
64 Octets
The total number of packets (including bad packets) received that are 64 octets in
length (excluding framing bits but including FCS octets).
65 to 127 Octets
The total number of packets (including bad packets) received that are between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
128 to 255 Octets
The total number of packets (including bad packets) received that are between 128
and 255 octets in length inclusive (excluding framing bits but including FCS octets).
256 to 511 Octets
The total number of packets (including bad packets) received that are between 256
and 511 octets in length inclusive (excluding framing bits but including FCS octets).
512 to 1023
The total number of packets (including bad packets) received that are between 512
Octets
and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1024 to 1518
The total number of packets (including bad packets) received that are between 1024
Octets
and 1632 octets in length inclusive (excluding framing bits but including FCS octets).
Related Commands
show rmon collection history

rmon collection history

The rmon collection history Interface Configuration (Ethernet, port-channel) mode
command enables a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no form of
this command.
Syntax
rmon collection history index [owner ownername] [buckets bucket-number]
[interval seconds]
no rmon collection history index
Parameters
• index — Specifies the statistics group index. (Range: 1-65535)
• ownername — Specifies the RMON statistics group owner name.
• bucket-number — Number of buckets specified for the RMON collection
history group of statistics. If unspecified, defaults to 50. (Range:1-65535)
• seconds — Number of seconds in each polling cycle. (Range: 1-3600)
Default Setting
RMON statistics group owner name is an empty string.
Number of buckets specified for the RMON collection history statistics group is
50.
Number of seconds in each polling cycle is 1800.
RMON Commands
517
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents