Bridge Address - Alcatel OS-LS-6224 User Manual

Command Function
show bridge Displays the multicast filtering configuration.
multicast filtering
show ports security Displays the port-lock status.
show ports security Displays the current dynamic addresses in locked ports.
addresses

bridge address

The bridge address Interface Configuration (VLAN) mode command adds a
MAC-layer station source address to the bridge table. To delete the MAC address,
use the no form of this command.
Syntax
bridge address mac-address {ethernet interface | port-channel
port-channel-number} [permanent | delete-on-reset | delete-on-timeout |
secure]
no bridge address [mac-address]
Parameters
• mac-address — A valid MAC address.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
• permanent — The address can only be deleted by the no bridge address
command.
• delete-on-reset — The address is deleted after reset.
• delete-on-timeout — The address is deleted after "age out" time has
expired.
• secure — The address is deleted after the port changes mode to unlock
learning (no port security command). This parameter is only available
when the port is in the learning locked mode.
Default Setting
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
Using the no form of the command without specifying a MAC address deletes
all static MAC addresses belonging to this VLAN).
Table 4-8. Address Table Commands
Address Table Commands
Mode
UE
PE
PE
4
Page
4-333
4-334
4-336
319