4
Command Line Interface
Default Configuration
The location is not configured.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no guidelines for this command.
Example
In this example, the LLDP MED location information for an Ethernet port is specified
as civic-address.
Console (config)# interface ethernet 1/e1
Console (config-if)# lldp med location civic-address a1:b2:c3:d4:e5:ff
clear lldp rx
The clear lldp rx Privileged EXEC mode command restarts the LLDP RX state
machine and clearing the neighbors table.
Syntax
clear lldp rx [ethernet interface]
Parameters
• interface — Ethernet port
Command Mode
Privileged EXEC
Command Usage
There are no guidelines for this command.
Example
In this example, the LLDP RX state machine is restarted and the neighbors
table is cleared for an Ethernet port.
Console# clear lldp rx ethernet 1/e1
show lldp configuration
The show lldp configuration Privileged EXEC mode command displays the Link
Layer Discovery Protocol (LLDP) configuration.
Syntax
show lldp configuration [ethernet interface]
Parameters
interface — Ethernet port
Command Mode
Privileged EXEC
342