Snmp-Server Group - Alcatel OS-LS-6224 User Manual

No check is made to determine that a MIB node corresponds to the "starting
portion" of the OID until the first wildcard.
Example
The following example creates a view that includes all objects in the MIB-II system
group except for sysServices (System 7) and all objects for interface 1 in the MIB-II
interface group.
Console(config)# snmp-server view user-view system included
Console(config)# snmp-server view user-view system.7 excluded
Console(config)# snmp-server view user-view ifEntry.*.1 included
Related Commands
show snmp
show snmp views

snmp-server group

The snmp-server group Global Configuration mode command configures a new
Simple Management Protocol (SNMP) group or a table that maps SNMP users to
SNMP views. To remove a specified SNMP group, use the no form of this
command.
Syntax
snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify
notifyview ]} [read readview] [write writeview]
no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]}
Parameters
• groupname — Specifies the name of the group.
• v1 — Indicates the SNMP Version 1 security model.
• v2 — Indicates the SNMP Version 2 security model.
• v3 — Indicates the SNMP Version 3 security model.
• noauth — Indicates no authentication of a packet. Applicable only to the
SNMP Version 3 security model.
• auth — Indicates authentication of a packet without encrypting it.
Applicable only to the SNMP Version 3 security model.
• priv — Indicates authentication of a packet with encryption. Applicable only
to the SNMP Version 3 security model.
• readview — Specifies a string that is the name of the view that enables only
viewing the contents of the agent. If unspecified, all objects except for the
community-table and SNMPv3 user and access tables are available.
• writeview — Specifies a string that is the name of the view that enables
entering data and configuring the contents of the agent. If unspecified,
nothing is defined for the write view.
• notifyview — Specifies a string that is the name of the view that enables
specifying an inform or a trap. If unspecified, nothing is defined for the notify
4
SNMP Commands
533