Show Dot1X Users - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Tx period
Max req
Supplicant timeout
Server timeout
Session Time
MAC address
Authentication Method
Termination Cause
State
Authentication success
Authentication fails
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout

show dot1x users

show dot1x users
The show dot1x users Privileged EXEC mode command displays active 802.1X
authenticated users for the device.
Syntax
show dot1x users [username username]
282
The number of seconds that the device waits for a response to
an Extensible Authentication Protocol (EAP)-request/identity
frame from the client before resending the request.
The maximum number of times that the device sends an
Extensible Authentication Protocol (EAP)-request frame
(assuming that no response is received) to the client before
restarting the authentication process.
Time in seconds the switch waits for a response to an
EAP-request frame from the client before resending the
request.
Time in seconds the switch waits for a response from the
authentication server before resending the request.
The amount of time the user is logged in.
The supplicant MAC address.
The authentication method used to establish the session.
The reason for the session termination.
The current value of the Authenticator PAE state machine and
of the Backend state machine.
The number of times the state machine received a Success
message from the Authentication Server.
The number of times the state machine received a Failure
message from the Authentication Server.