Mac Access-List - Alcatel OS-LS-6224 User Manual

IP Protocol
Authentication Header
EIGRP routing protocol
Open Shortest Path Protocol
Protocol Independent Multicast
Layer Two Tunneling Protocol
ISIS over IPv4
(any IP protocol)
Default Setting
This command has no default configuration
Command Mode
IP-Access List Configuration mode
Command Usage
Use the ip-access-list Global Configuration mode command to enable the
IP-Access List Configuration mode.
Before an Access Control Element (ACE) is added to an ACL, all packets are
permitted. After an ACE is added, an implied deny-any-any condition exists at
the end of the list and those packets that do not match the defined conditions
are denied.
Example
The following example shows how to define a deny statement for an IP ACL.
Console(config)# ip-access-list ip-acl1
Console(config-ip-al)# deny rsvp 192.1.1.1 0.0.0.255 any
Related Commands
ip-access-list
permit (ip)
show access-lists

mac access-list

The mac access-list Global Configuration mode command enables the
MAC-Access List Configuration mode and creates Layer 2 ACLs. To delete an ACL,
use the no form of this command.
Syntax
mac access-list name
Abbreviated Name
ah
eigrp
ospf
pim
l2tp
isis
any
4
ACL Commands
Protocol Number
51
88
89
103
115
124
(25504)
311