Dot1X Port-Control - Alcatel OS-LS-6224 User Manual

dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users

dot1x port-control

The dot1x port-control Interface Configuration mode command enables manually
controlling the authorization state of the port. To return to the default configuration,
use the no form of this command.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
Parameters
• auto — Enables 802.1X authentication on the interface and causes the port
to transition to the authorized or unauthorized state based on the 802.1X
authentication exchange between the port and the client.
• force-authorized — Disables 802.1X authentication on the interface and
causes the port to transition to the authorized state without any
authentication exchange required. The port resends and receives normal
traffic without 802.1X-based authentication of the client.
• force-unauthorized — Denies all access through this interface by forcing
the port to transition to the unauthorized state and ignoring all attempts by
the client to authenticate. The device cannot provide authentication
services to the client through the interface.
Default Configuration
Port is in the force-authorized state
Command Mode
Interface Configuration (Ethernet)
Command Usage
It is recommended to disable spanning tree or to enable spanning-tree
PortFast mode on 802.1x edge ports (ports in auto state that are connected to
end stations), in order to get immediately to the forwarding state after
successful authentication.
802.1x Commands
271
4