Alcatel OS-LS-6224 User Manual page 380

4
Command Line Interface
• month — Month. (Range: first three letters by name, like Jan)
• year — year - no abbreviation (Range: 2000 - 2097)
• hh:mm — Time in military format, in hours and minutes.
(Range: hh: 0 - 23, mm:0 - 59)
• offset — Number of minutes to add during summer time. (Range: 1 - 1440)
• acronym — The acronym of the time zone to be displayed when summer
time is in effect. (Range: Up to 4 characters)
Default Setting
Summer time is disabled.
offset — Default is 60 minutes.
acronym — If unspecified default to the timezone acronym.
If the timezone has not been defined, the default is UTC.
Command Mode
Global Configuration mode
Command Usage
In both the date and recurring forms of the command, the first part of the
command specifies when summer time begins, and the second part specifies
when it ends. All times are relative to the local time zone. The start time is
relative to standard time. The end time is relative to summer time. If the
starting month is chronologically after the ending month, the system assumes
that you are in the southern hemisphere.
USA rule for daylight savings time:
• Start: First Sunday in April
• End: Last Sunday in October
• Time: 2 am local time
EU rule for daylight savings time:
• Start: Last Sunday in March
• End: Last Sunday in October
• Time: 1.00 am (01:00)
Example
The following example sets summer time starting on the first Sunday in April at 2 am
and finishing on the last Sunday in October at 2 am.
Console(config)# clock summer-time recurring first sun apr 2:00 last sun
oct 2:00
Related Commands
clock set
clock source
356