3
Configuring the Switch
• Primary — Indicates the primary server provides SNTP information.
• Secondary — Indicates the backup server provides SNTP information.
• Status — Displays the SNTP server operating status.
• Last Response — Displays the last time a response was received from the SNTP
server.
• Offset — Indicates the time difference between the device local clock and the
acquired time from the SNTP server.
• Delay — Indicates the amount of time it takes for a device request to reach the
SNTP server.
• Remove — Removes SNTP servers from the SNTP server list. The possible field
values are:
• Checked — Removes the SNTP server.
• Unchecked — Maintains the SNTP server.
Web – Select System, System Management, SNTP, Servers. Define the fields and
click Apply.
CLI - The following is an example of the SNTP server commands:
Console(config)# sntp server 192.1.1.1
Defining SNTP Interface Settings
The SNTP Interface Page contains fields for setting SNTP on different interfaces.
54
Figure 3-14. SNTP Servers Page
4-364