Adding A Policy; Figure 3-133. Policy Table Page - Alcatel OS-LS-6224 User Manual

Adding a Policy

In addition to the fields in the Policy Table Page, the Add Policy Table Page contains
the following fields:
• Class Map — Selects a class map for the class.
• Action — Indicates the action performed on incoming packets matching the policy
profile. The possible field values are:
• Trust - Applies the selected Trust settings.
• Set - Redefines the DSCP settings.
• Police — Policer type for the class. Possible values are:
• Aggregate — Configures the class to use a configured aggregate policer
selected from the drop-down menu. An aggregate policer is defined if the policer
is shared with multiple classes. Traffic from two different ports can be configured
for policing purposes. An aggregate policer can be applied to multiple classes
in the same policy map, but cannot be used across different policy maps.
• Single — Configures the class to use manually configured information rates and
exceed actions.
• Aggregate Policer — User-defined aggregate policers.
• Ingress Committed Information Rate (CIR) — CIR in bits per second. This field
is only relevant when the Police value is Single.

Figure 3-133. Policy Table Page

Configuring Quality of Service
3
249