Show Bridge Address-Table - Alcatel OS-LS-6224 User Manual

Related Commands
show ports security addresses

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all
entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel
port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Internal usage VLANs (VLANs that are automatically allocated on ports with a
defined Layer 3 interface) are presented in the VLAN column by a port number
and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically
learned are displayed in the MAC address table. This includes, for example,
MAC addresses defined in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
Console# show bridge address-table
Aging time is 300 sec
Vlan
--------- --------------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
1 00:10:0D:48:37:FF
Mac Address
Address Table Commands
Port Type
---- -------
5/e8 dynamic
5/e8 dynamic
5/e9 static
4
329