Power Inline Traps Enable - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
measured power (Range: 1-99).
Default Setting
The default threshold is 95 percent.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the power usage threshold for which alarms are
sent to 80%.
Console(config)# power inline usage-threshold 80
Related Commands
power inline
power inline powered-device
power inline priority
show power inline

power inline traps enable

The power inline traps enable Global Configuration mode command enables inline
power traps. To disable inline power traps, use the no form of this command.
Syntax
power inline traps enable
no power inline traps
Default Setting
Inline power traps are disabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables inline power traps to be sent when a power usage
threshold is exceeded.
Console(config)# power inline traps enable
474