Sntp Broadcast Client Enable - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Example
The following example sets the polling time for the Simple Network Time Protocol
(SNTP) client to 120 seconds.
Console(config)# sntp client poll timer 120
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key

sntp broadcast client enable

sntp anycast client enable
sntp unicast client enable
sntp unicast client poll
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables
Simple Network Time Protocol (SNTP) broadcast clients. To disable SNTP
broadcast clients, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Setting
The SNTP broadcast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Use the sntp client enable Interface Configuration mode command to enable
the SNTP client on a specific interface.
Example
The following example enables the SNTP broadcast clients.
Console(config)# sntp broadcast client enable
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key
360