Alcatel OS-LS-6224 User Manual page 394

4
Command Line Interface
unit://member/
image
unit://member/
boot
null:
backup-config
unit://member/
backup-config
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Up to five backup configuration files are supported on the device.
The location of a file system dictates the format of the source or destination
URL.
The entire copying process may take several minutes and differs from protocol
to protocol and from network to network.
*.prv and *.sys files cannot be copied.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, you
cannot copy if one of the following conditions exist:
The source file and destination file are the same file.
xmodem: is the destination file. The source file can be copied to image, boot
and null: only.
tftp:// is the source file and destination file on the same copy.
The following table describes copy characters:
Character
!
.
Copying an Image File from a Server to Flash Memory
370
Image file on one of the units. To copy from the master to all units,
specify * in the member field.
Boot file on one of the units. To copy from the master to all units,
specify * in the member field.
Null destination for copies or files. A remote file can be copied to null
to determine its size.
Represents the backup configuration file.This is a user-defined
name for up to four backup configuration files.
Backup configuration on one of the units.
Description
For network transfers, indicates that the copy process is taking
place. Each exclamation point indicates successful transfer of
ten packets (512 bytes each).
For network transfers, indicates that the copy process timed out.
Generally, many periods in a row means that the copy process
may fail.